Land & Construction

Nepal House Construction Cost Calculator

घर निर्माण लागत क्याल्कुलेटर

Estimate house construction cost in Nepal from built-up area and finish level.

Get a ballpark budget for building a house in Nepal. Enter the area per floor, the number of floors and a construction rate — or pick a finish level — to see the base cost, contingency and total, plus how each finish level compares.

Land & ConstructionFree · No sign-up
Buffer for price rises and extras.
Estimated total cost—
Total built-up area
—
Base construction cost
—
Contingency
—
Estimated total
—
Cost per floor
—

Cost across finish levels

The same built-up area priced at each benchmark tier (contingency included).

Finish levelRate (Rs/sq ft)Low estimateHigh estimate
Free to use · Works in your browserQuestions & sources

About the house construction cost calculator

Building a house in Nepal is a large, long commitment, and the first question is always the same: roughly how much will it cost? This calculator gives a planning estimate from the built-up area and a construction rate per square foot, then shows how the same area prices out across basic, mid-range and premium finishes. It is a starting point for budgeting, comparing contractor quotes and deciding how much house a given amount of money buys.

Built-up area, not plot size

The estimate is driven by built-up area — the floor area you actually construct, summed across every floor — not the size of the plot. A 1,000 sq ft footprint over two floors is 2,000 sq ft of built-up area, and the cost scales with that figure. Land, municipal approval fees, structural design, compound walls and site development are not included and should be budgeted separately.

Benchmark rates

As a 2026 planning guide, structure-and-finish costs run roughly Rs 3,000–3,500 per sq ft for basic work, Rs 4,000–5,500 for mid-range and Rs 6,000–7,500 for premium finishes. Location, soil conditions, material grade and design complexity all move these numbers, so treat them as a range rather than a quotation.

Contingency

Add a buffer of 5–10% for material price swings and small changes during construction — more if the build is long or material prices are volatile.

Frequently asked questions

How much does it cost to build a house per square foot in Nepal?
As a 2026 planning guide, structure-and-finish costs run roughly Rs 3,000–3,500 per sq ft for basic work, Rs 4,000–5,500 for mid-range, and Rs 6,000–7,500 for premium finishes. Site, location, soil and design all shift these figures.
What does “built-up area” mean?
Built-up area is the total floor area you actually build, summed across all floors — not the plot size. Multiply the area per floor by the number of floors to get the total.
Does the estimate include land, approval and design costs?
No. This tool covers the structure and finishes only. Land purchase, municipal approval fees, structural design, compound walls and site development are separate and should be budgeted on top.
How much contingency should I allow?
A buffer of 5–10% is typical for material price swings and small changes during construction; use 10% or more for a longer build or volatile material prices.
How do I calculate the built-up area of my house?
Multiply the area of one floor by the number of floors. If the plan is 1,200 sq ft per floor over three floors, the built-up area is 3,600 sq ft, and that is the figure you enter here.
What per-square-foot construction rate should I use?
Use Rs 3,000–3,500 for basic finishes, Rs 4,000–5,500 for mid-range and Rs 6,000–7,500 for premium. If you have a contractor quotation, use its rate per sq ft directly for a more accurate estimate.

Sources & further reading

  1. Department of Urban Development and Building Constructiondudbc.gov.np
  2. Federation of Contractors’ Associations of Nepalfcan.org.np